Amazon FBA prep for moving bags comes down to four gates: an FNSKU label on every unit, a sealed poly bag with a suffocation warning when the opening exceeds 5 inches, a shipping carton at or under 50 pounds and 25 inches per side for multi-unit boxes, and a pallet no larger than 40 by 48 inches, no taller than 72 inches, and no heavier than 1,500 pounds. Miss any one of these and the fulfillment center can refuse, return, or repackage your shipment at your expense.

Moving bags are a favorable FBA product in one respect: they fold flat, so a 1,000-bag order occupies a fraction of the space of pre-stuffed packaging. The risk sits in the prep details, not the product. Most FC rejections on this category trace back to labeling errors, overweight cartons, or poly bags that do not meet the suffocation and sizing rules. This guide walks through each gate with the exact numbers from Amazon’s published prep documentation, so you can build the requirements into your factory order instead of fixing them at a prep center. The full checklist lives in the official FBA packaging, prep, and labeling guide on sell.amazon.com; the pallet and box specs below come from Amazon’s Packaging and Shipping Inventory to Amazon quick reference.

The Four Prep Gates at a Glance

The table below summarizes the four gates. Every number in it comes from Amazon’s own FBA packaging and prep requirements, not from a seller forum.

Each gate is a separate inspection point at the receiving dock. A shipment can pass labeling and fail on the pallet, and the whole truck can be held. Working through the gates in order, starting with the unit, keeps the fix cheap: a label costs cents at the factory and dollars at a prep center.

FNSKU Labels Decide Whether Your Units Enter an FC

Every individual moving bag unit needs its own FNSKU label. Amazon’s prep guide specifies a label 1 to 2 inches tall and 2 to 3 inches wide, printed in black ink on non-reflective paper with an adhesive backing, and produced on a laser printer at 300 DPI. The label goes on a smooth, flat surface of the poly bag or product packaging, away from corners, edges, and curves. Original manufacturer barcodes (UPC, EAN, or ISBN) must be covered or removed so the FNSKU is the only scannable code. Damaged or photocopied labels are not accepted.

The math changes with order size. On a 500-bag order, applying labels at a prep center is painless. On a 5,000-bag order, each label application step multiplies, and an unreadable batch of labels can stall the whole shipment. Ask your supplier to print labels from the PDF your seller account generates and apply them during packing. Factory-applied labels on flat-packed woven PP moving bags also survive the journey better than labels applied to already-creased poly bags.

Unit Packaging: Poly Bags and Suffocation Warnings

FBA requires units to arrive sealed and protected. For moving bags, that means a transparent poly bag that is completely sealed around the folded product. Two specific rules apply. First, if the poly bag opening is larger than 5 inches, the bag must carry a suffocation warning label. Second, the poly bag may not extend more than 3 inches beyond the product’s dimensions. Loose items, bags that will not stay closed, or units requiring multi-piece assembly are rejected.

Folded woven PP moving bags pack tightly, so the poly sleeve sits close to the product and the 3-inch limit is easy to hold. The common mistake is using a loose jumbo poly bag to save bagging time, then finding the excess material violates the sizing rule at the dock. Specify the sleeve dimensions in your factory’s packing instructions, and confirm the suffocation warning is printed on the sleeve itself, not on a separate insert that can fall out.

Carton Rules: Weight, Dimensions, and Barcode Limits

Cartons follow two hard limits. A box containing multiple units may weigh up to 50 pounds. A box containing a single item may exceed 50 pounds, but then it must carry a Team Lift safety label on the top and sides, and once it passes 100 pounds, a Mechanical Lift label. For boxes holding multiple standard-size units, no side may exceed 25 inches, regardless of what your carrier allows.

Case packing rules also matter for moving bags. All units in a case must share the same merchant SKU, the same condition, and equal quantities, because Amazon may split cases at the appropriate case-pack level during receiving. Scannable barcodes on the outside of the shipping case must be removed or covered, the same rule that applies to unit labels. The shipment label for each box measures 3 and 1/3 by 4 inches, prints from the Shipping Queue, and sits at least 1.25 inches from any natural edge of the box. Seal the box so the tape does not cover the label.

Pallet Rules: 40 by 48 Inches, 72 Inches, 1,500 Pounds

Palletized LTL and FTL shipments to Amazon fulfillment centers follow a fixed spec. Pallets must be 40 by 48 inches with 4-way forklift entry, built to GMA standard Grade B or higher, and wrapped in clear stretch wrap. Total pallet weight may not exceed 1,500 pounds, total height may not exceed 72 inches including the pallet itself, and contents may not overhang the pallet by more than 1 inch. Each pallet carries four shipment labels, one in the top center of each side, plus one shipment ID per pallet. Labels go on the outside of the stretch wrap.

Moving bag pallets rarely hit the weight cap, because the product is light. Height and overhang are the real risks. A pallet stacked with 50-inch cartons plus a pallet board lands under 72 inches, but a careless second row can push past it. Measure the loaded pallet before the truck arrives, not after the carrier refuses it. For smaller orders that do not fill a pallet, compare LCL vs FCL shipping for bag imports to see whether parcel, partial pallet, or full container economics fit your volume.

Why Factory Prep Changes Your Per-Unit Cost

Prep work done in China during production costs a fraction of the same work at a US prep center, because it rides on the existing packing line. The factory already folds the bags, so adding the poly sleeve, the FNSKU label, and the case pack spec costs minutes per carton, not per unit. The same tasks performed at a prep center add a separate per-unit fee on top of freight and handling. On a 5,000-unit order, that difference can cover the freight cost of the entire shipment.

Foldable construction is the enabler. Bags that fold flat cut empty container space by 30 to 50 percent compared to rigid packaging, which lowers the freight component of your bag landed cost calculation before you add any FBA fees. To size the inbound move, use the same math as the moving bags per 40ft container CBM guide, then subtract nothing for prep because the prep is already inside the carton.

TIIOCTI builds heavy duty moving bags for Amazon sellers and distributors in woven PP with flat-fold packing, and the factory can apply FNSKU labels and build cartons to your FBA case spec before shipment. BSCI and GRS certified, with DDP delivery to the US, the factory price runs up to 10 percent below comparable platform sellers, and sample orders are free. Ask for a prep checklist with your quote so the label and carton rules are written into the order, not improvised at the dock.

Rejection Scenarios That Cost Real Money

Receiving problems fall into repeatable patterns. A missing or unscannable FNSKU label returns the unit to the seller or lands it in the FC’s problem inventory. An open poly bag on a moving bag unit triggers a repackage charge. A carton over 50 pounds with multiple units gets rejected even if the carrier accepted it. A pallet with more than 1 inch of overhang is refused at the dock door, which can delay the entire inbound by days. A shipment label covered by tape reads as missing when the laser scanner cannot see it.

The fix for all five is a pre-shipment checklist. Walk the same four gates the FC will walk: label on every unit, sealed poly with warning where required, carton weight and dimensions, pallet height and overhang. Suppliers that have shipped FBA freight before will run this checklist themselves; suppliers that have not will hand you a filled container and a surprise. State the requirements in the RFQ, not in a post-production email.

Заключение

FBA prep for moving bags is a four-gate process with fixed numbers: FNSKU labels at 1 by 2 to 2 by 3 inches printed at 300 DPI, sealed poly bags with suffocation warnings over 5-inch openings, cartons at or under 50 pounds and 25 inches per side, and 40 by 48 pallets capped at 72 inches and 1,500 pounds. Build those numbers into the factory order and the shipment clears receiving the first time.

Send your Amazon listing details and target order volume to the TIIOCTI team for a quote that includes FBA-ready packing. The factory applies labels, builds cases to your spec, and ships DDP, so your prep cost stays near zero.

Часто задаваемые вопросы